Service available now · 50 states Mon–Sun · 7AM–9PM EST
How It Works Cooktop

How Fisher Paykel Induction Power Boost Works

TL;DR: Fisher Paykel induction power boost sends extra power to one zone so a large pot of water boils sooner. It works through the pan itself, may affect a neighboring zone on some cooktops and needs a flat induction pan. Exact power and timing are in your owner's manual.

Updated Nov 19, 2026 5 min read
TL;DR: Fisher Paykel induction power boost sends extra power to one zone so a large pot of water boils sooner. It works through the pan itself, may affect a neighboring zone on some cooktops and needs a flat induction pan. Exact power and timing are in your owner's manual.

Fisher Paykel induction power boost is a short burst of extra power sent to one cooking zone so that a large pot of water comes to a boil sooner. On our model list, PowerBoost appears on the Series 9 CI304DTB2 (30-inch) and CI365DTB2 (36-inch) induction cooktops. It is a convenience, not a requirement, and it works on the same principle as every other induction setting: more electrical power goes into the magnetic field under the pan, so the pan itself makes more heat. This guide explains what a boost is, whether it may affect the other zones and which pans and habits make it work. What it does on your exact model, including how long it runs, is in your owner’s manual.

What it isExtra power for a single induction zone, for jobs like bringing a large pot to a boil
Where it appearsThe Series 9 CI304DTB2 (30-inch) and CI365DTB2 (36-inch) on our model list
How it heatsA stronger magnetic field makes the pan itself produce more heat
What it needsA pan that suits induction and fits the zone
Power and timingPer your model’s owner’s manual; this article gives no figures

What does the PowerBoost setting on a Fisher Paykel induction cooktop do?

Every induction zone has a coil under the glass. When you switch the zone on, the electronics send current through the coil and a magnetic field passes through the glass into a suitable pan. Our guide on how Fisher Paykel induction cooktops work explains the idea in detail. A power boost simply asks the electronics to send more than the normal top level to one zone. Because the heat is made in the pan rather than in the surface, the extra power reaches the food quickly, which is why a boost is most useful for water, for a large pot or for the first minute of a sear.

The glass does not make the heat, so it stays cooler than a radiant surface, but it is warmed by the hot pan. Treat the zone and its surroundings as hot after a boost, and keep handles turned away from the edge.

Can a boost affect the other zones?

Possibly, but we cannot tell you that it does on a Fisher & Paykel cooktop. Some induction cooktops manage the power between zones, so that a boost on one zone can hold another zone back, and others do not. Whether your model does, and which zones are involved, is in the owner’s manual. If a neighboring zone seems weaker while a boost is running, the manual is the place to look, and a zone that keeps cutting out or a code that returns is not something to assume is normal.

Our page on a zone that shuts off mid-cook explains the cases where a technician is needed. Check the manual for what your model does after a boost. A zone that keeps cutting out, or a code that returns, needs a technician.

A close-up of water at a rolling boil in a wide pot on a glass-ceramic surface
A boost is for the first stage of cooking, such as bringing a large pot to a boil.

Which pans work well with a boost?

A boost only helps if the pan can take it. The pan must suit induction, which our induction cookware tips explain, and its base should be flat, so the magnetic field and the heat are spread across the whole bottom. A pan that is much smaller than the zone is not detected well, and one that is warped will rock and heat unevenly. Our guide to a cooktop that does not detect the pan covers the case where the zone will not start at all.

Use a pot that holds the water or food comfortably, because a boost brings a pot to the boil quickly and an overfull pot will spill. Lids help water reach a boil sooner and keep the glass cleaner, and a pot with a heavy base holds heat well after you step down from the boost. Large, flat griddle plates and oddly shaped pans belong in a flexible area, which our SmartZone cooking tips describe.

How should you use a boost safely?

Stay at the cooktop. A boost can take water from a quiet simmer to a rolling boil in a short time, and oil can go from warm to smoking just as quickly. Never leave a pan of oil on a boost, because a grease fire is a real risk. If oil in a pan catches fire, put a lid on the pan, turn the zone off and do not use water. Keep the glass clean of spills, since sugar and food residue can burn onto a hot surface, and our induction cooktop cleaning guide shows how to care for the glass.

Step down from the boost once the food is up to temperature. A boost is for the first stage of cooking, not for holding a simmer. Many cooks forget this and scorch a sauce within seconds.

When is a power boost problem a technician’s job?

If the boost never engages, if a zone switches off every time you use it, or if the cooktop shows a code that returns, stop and check the basics first: a suitable pan, the right zone, clean controls and a breaker that has not tripped. Our guide to an induction cooktop that is not heating works through the checks. If the problem remains, do not lift the cooktop or open anything beneath it, because the area holds high-voltage wiring and a technician must handle it. If you see water near the cooktop, smell something burning or notice sparks, switch the breaker off at the panel while standing on a dry floor. We are an independent repair company, not the manufacturer. Our cooktop repair page explains how a visit works, and you can schedule a visit online.

Frequently asked questions
What is power boost on a Fisher Paykel induction cooktop?
It is a burst of extra power for one zone, useful for bringing a large pot of water to a boil. On our model list it appears on the Series 9 CI304DTB2 (30-inch) and CI365DTB2 (36-inch) cooktops.
Does the boost make the other zones weaker?
On some induction cooktops it does, on others it does not. Check your owner’s manual for how your model handles it.
How long does the boost run?
That depends on the model. The duration and the power level are in your owner’s manual, not in this article.
Can I use any pan with a boost?
Use a flat-bottomed pan that suits induction and fits the zone. A warped or very small pan heats poorly and may not be detected.
When should I call a technician?
When the boost never engages, a zone keeps shutting off or a code returns after the basic checks. You can book a visit online.

Schedule Fisher & Paykel
appliance repair

Experienced technicians in all 50 US states. Average response within 24 hours.

  • Experienced Fisher & Paykel specialists
  • Genuine OEM parts
  • 30-day labor warranty
  • Upfront pricing
Need professional help?

Book experienced Fisher & Paykel
appliance repair

On-site diagnostics, genuine OEM parts, 30-day labor warranty. Service in all 50 US states.