Service available now · 50 states Mon–Sun · 7AM–9PM EST
Repair Costs Dishwasher

Fisher & Paykel Dishwasher Repair Cost Guide (2026)

How much does Fisher & Paykel dishwasher repair cost? Detailed breakdown by repair type: drain pump, control board, door latch, spray arm, motor — with parts and labor estimates.

Updated Jun 17, 2026 5 min read
How much does Fisher & Paykel dishwasher repair cost? Detailed breakdown by repair type: drain pump, control board, door latch, spray arm, motor — with parts and labor estimates.

This guide breaks down fisher-paykel dishwasher repair cost so you can budget with confidence and judge whether fixing your unit beats replacing it. Fisher & Paykel dishwasher repairs typically start from $150 depending on the component and your location. Understanding typical costs helps you budget and avoid overpaying — and decide whether repair makes financial sense for your unit’s age.

Average repair costs by component

Drain pump (from $180)

The most common repair. A failed drain pump causes standing water and error code E24. Parts cost from $60; labor is typically 1-1.5 hours. Before scheduling, check the drain filter and drain hose for clogs — this is free and resolves the issue in about 30% of cases. See our drain troubleshooting guide.

Control board (from $250)

The most expensive common repair. The main control board (PCB) manages all dishwasher functions. When it fails, you may see multiple error codes, unresponsive buttons, or cycles that stop mid-run. Parts alone are from $150 depending on the model series. Board replacement takes 30-60 minutes of labor.

Door latch assembly (from $150)

Includes the latch mechanism and door switch. A relatively inexpensive repair — the part is from $40 and installation takes under an hour.

Wash motor/circulation pump (from $280)

The wash motor drives water through the spray arms. When it fails, the dishwasher fills with water but doesn’t clean — you’ll hear the hum but no water movement. Parts are from $120; labor is 1.5-2 hours due to disassembly required.

Water inlet valve (from $150)

Controls water flow into the dishwasher. A failed valve causes slow filling, no filling, or continuous filling (overflow). Inexpensive part (from $30) with about one hour of labor.

Spray arm replacement (from $80)

If a spray arm is cracked and leaking, replacement is straightforward. Parts are from $20 and the job takes 15-30 minutes.

Service call / diagnostic fee

Most appliance repair companies charge a diagnostic fee from $80 to come to your home and identify the problem. This fee is typically applied toward the repair cost if you proceed. Our Fisher & Paykel service appointments include diagnostics in the repair price — no separate trip charge.

Factors that affect cost

  • Model series — Series 9 and Series 11 parts cost more than Series 5 or Series 7 equivalents
  • Location — Labor rates vary by metro area. Expect from $80/hour depending on your service area
  • Part availability — Older or discontinued models may require backordered parts, adding wait time but not usually cost
  • Age of the unit — On a unit nearing the end of its service life, weigh repair against replacement before committing to a major component

Repair vs. replace threshold

If the repair cost exceeds 50% of a comparable new Fisher & Paykel dishwasher (starting from around $800), replacement usually makes more financial sense — especially if the unit is over 8 years old. See our repair vs. replace guide for a detailed decision framework.

Reading the fisher-paykel dishwasher repair cost picture

The numbers above sort cleanly into two groups: quick, affordable fixes like a spray arm or inlet valve, and bigger investments like the control board or wash motor that demand the repair-versus-replace math. Always rule out the free checks first — a clogged filter or drain hose mimics an expensive pump failure surprisingly often. Once you know which component is at fault and what it costs, the decision usually makes itself. When you’re ready to move forward, schedule professional service for a firm diagnosis.

What drives Fisher & Paykel dishwasher pricing

Two variables move a Fisher & Paykel dishwasher repair bill more than any other: which series you own and where you live. DishDrawer and Series 9 or 11 boards and pumps simply cost more than their Series 5 and 7 counterparts, and metro labor rates stack on top of that. Knowing your model and serial from the rating plate on the tub’s inner edge lets a specialist technician quote the right part the first time and avoid a wasted trip. Every estimate depends on the diagnosis, but independent repair through trusted parts suppliers, backed by a 30-day labor warranty, starts from $150 for a Fisher & Paykel dishwasher.

Schedule Fisher & Paykel
appliance repair

Experienced technicians in all 50 US states. Average response within 24 hours.

  • Experienced Fisher & Paykel specialists
  • Genuine OEM parts
  • 30-day labor warranty
  • Upfront pricing
Need professional help?

Book experienced Fisher & Paykel
appliance repair

On-site diagnostics, genuine OEM parts, 30-day labor warranty. Service in all 50 US states.